james
04-20-2006, 02:19 PM
Computer Setup for Projector Control
This is your check list for setting up a computer for projector control. Some of these items may be optional, but if you are not 100% positive regarding which items,
do them all.
1. Select your screen location and projector and select your cabling connection.
2. Turn on Dual-Head video support on your computer.
3. Install the eWorship software and hookup your computer and projector on a table before installing the projector to insure everything is working.
4. Remove any desktop wallpaper from your computer. If possible, set the
background color to black. You do not need to disable the screensaver,
eWorship temporarily disables the screensaver while running.
5. Turn off any custom button actions that convert single-click to double-click, and slow down the Double-Click speed in the Control Panel under Mouse.
This is your check list for setting up a computer for projector control. Some of these items may be optional, but if you are not 100% positive regarding which items,
do them all.
1. Select your screen location and projector and select your cabling connection.
2. Turn on Dual-Head video support on your computer.
3. Install the eWorship software and hookup your computer and projector on a table before installing the projector to insure everything is working.
4. Remove any desktop wallpaper from your computer. If possible, set the
background color to black. You do not need to disable the screensaver,
eWorship temporarily disables the screensaver while running.
5. Turn off any custom button actions that convert single-click to double-click, and slow down the Double-Click speed in the Control Panel under Mouse.